
- 10 -
One relay output with current carrying capacity of
3 A @ 30 VDC or 3 A @ 240 VAC
Optical Fiber (100BaseFX)
0 to 5 km, 1300 nm (50/125μm, 800 MHz*km)
0 to 4 km, 1300 nm (62.5/125μm, 500 MHz*km)
Single-mode:
0 to 40 km, 1310 nm (9/125μm, 3.5 PS/(nm*km))
Multi-mode: -20 dBm; Single-mode: -5 dbm
Multi-mode: -10 dBm; Single-mode: 0 dbm
Multi-mode: -32 dBm; Single-mode: -34 dbm
Input Voltage WV: 24/48 VDC (18 to 72 V)
HV: 110/220 VDC/VAC (88 to 300 VDC and 85 to 264
VAC)
Max. 0.364 A @ 48 VDC
Max. 0.147/0.077 A @ 110/220 VDC
Max. 0.283/0.19 A @ 110/220 VAC
IP40 protection, metal case
440 x 44 x 325 mm (17.32 x 1.73 x 12.76 in)
Standards and Certifications
FCC Part 15 Subpart B Class A, EN55022 class A
-40 to 85°C (-40 to 185°F)
Cold start of min. 100 VAC at -40°C
-40 to 85°C (-40 to 185°F)
Ambient Relative
5 to 95% (non-condensing)
See www.moxa.com/warranty
Rack Mounting Instructions
1. Elevated Operating Ambient: If installed in a closed or multi-unit
rack assembly, the operating ambient temperature of the rack
environment may be greater than room ambient. Therefore,
consideration should be given to installing the equipment in an
environment compatible with the maximum ambient temperature
(Tma) specified by the manufacturer.
2. Reduced Air Flow: Installation of the equipment in a rack should
be such that the amount of air flow required for safe operation of the
equipment is not compromised.
Comentarios a estos manuales