AMX NXF Especificaciones descargar pdf (Pagina 37)

NXC-VAI4 Analog Voltage Control Card

NetLinx Cardframe, Control Cards, and NetModules

Channel Assignments

The channel ON/OFF assignments for the NXC-VAI4 are described in the following table.

Off = 50% voltage, and all channel assignments are mutually exclusive.

NXC-VAI4 Channel Assignments

Channel State Function

ON While channel 1 is ON, the voltage on Output 1 will ramp up at the "CURRENT

OUTPUT 1 RAMP UP TIME" rate. The voltage ramp stops if the maximum is reached.

OFF Stops voltage ramping on Output 1 at current value.

ON While channel 2 is ON, the voltage on Output 2 will ramp up at the "CURRENT

OUTPUT 2 RAMP UP TIME" rate. The voltage ramp stops if the maximum is reached.

OFF Stops voltage ramping on Output 2 at current value.

ON While channel 3 is ON, the voltage on Output 3 will ramp up at the "CURRENT

OUTPUT 3 RAMP UP TIME" rate. The voltage ramp stops if the maximum is reached.

OFF Stops voltage ramping on Output 3 at current value.

ON While channel 4 is ON, the voltage on Output 4 will ramp up at the "CURRENT

OUTPUT 4 RAMP UP TIME" rate. The voltage ramp stops if the maximum is reached.

OFF Stops voltage ramping on Output 4 at current value.

ON While channel 5 is ON, the voltage on Output 1 will ramp down at the "CURRENT

OUTPUT 1 RAMP DOWN TIME" rate. The voltage ramp stops if the minimum is

reached.

OFF Stops voltage ramping on Output 1 at current value.

ON While channel 6 is ON, the voltage on Output 2 will ramp down at the "CURRENT

OUTPUT 2 RAMP DOWN TIME" rate. The voltage ramp stops if the minimum is

reached.

OFF Stops voltage ramping on Output 2 at current value.

ON While channel 7 is ON, the voltage on Output 3 will ramp down at the "CURRENT

OUTPUT 3 RAMP DOWN TIME" rate. The voltage ramp stops if the minimum is

reached.

OFF Stops voltage ramping on Output 3 at current value.

ON While channel 8 is ON, the voltage on Output 4 will ramp down at the "CURRENT

OUTPUT 4 RAMP DOWN TIME" rate. The voltage ramp stops if the minimum is

reached.

OFF Stops voltage ramping on Output 4 at current value.

ON Reserved [do not use]

OFF Reserved [do not use]

ON While channel 10 is ON, the voltage on Output 1 is set to 100%

OFF Sets Output 1 voltage to 50%.

ON While channel 11 is ON, the voltage on Output 2 is set to 100%

OFF Sets Output 2 voltage to 50%.

ON While channel 12 is ON, the voltage on Output 3 is set to 100%

OFF Sets Output 3 voltage to 50%.

ON While channel 13 is ON, the voltage on Output 4 is set to 100%

OFF Sets Output 4 voltage to 50%.

ON While channel 14 is ON, the voltage on Output 1 is set to 0%

OFF Sets Output 1 voltage to 50%.

ON While channel 15 is ON, the voltage on Output 2 is set to 0%

OFF Sets Output 2 voltage to 50%.

ON While channel 16 is ON, the voltage on Output 3 is set to 0%

OFF Sets Output 3 voltage to 50%.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 49 50

Comentarios a estos manuales

Sin comentarios

AMX NXF Especificaciones Pagina 37

Comentarios a estos manuales

Relacionado con productos y manuales para Gateways / Controladores AMX NXF