AMX NXB-CCG Especificaciones descargar pdf (Pagina 26)

Web Interface Pages

NXB-CCG NetLinx® Clear Connect™ Gateway

2. The device will then report itself to the system.

3. In the Add Devices page, the Device Heard popup window appears (FIG. 22), displaying the type of

device that reported itself.

4. If the device is not a valid device for the network, the Add Devices page displays a message stating this,

and the device cannot be activated.

5. In the Device Heard window, enter a unique name for the device and add it to the system by clicking Add

or pressing Enter on your keyboard.

Removing Devices

To remove a device:

1. In the Add Devices page, click the Remove link in the Action column while the device is in Activation

Mode.

2. When prompted, click Ye s.

Exiting Activation Mode

To exit Activation Mode:

1. With the Add Devices page in Activation Mode, click the “Done” button. The NXB-CCG will start

exiting all devices from activation.

2. After about 10 to 15 seconds, the original Add Devices screen appears, indicating that activation was

exited successfully.

FIG. 22 Device Heard window

FIG. 23 Exiting Add/Remove Devices Mode

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 39 40

Sin comentarios

AMX NXB-CCG Especificaciones Pagina 26