
5
(1) RCA Jack, video signal must be present to pass
audio
S/PDIF, video signal must be present to pass audio
S/PDIF Audio Format Support
Dolby Digital, DTS, 2 CH L-PCM
Dolby Digital and DTS support up to 48kHz, 5.1
channels
32 kHz, 44.1 kHz, 48 kHz, 96 kHz
S/PDIF Input Signal Level Range
200 mVpp to 600 mVpp terminated
Analog to Digital Reference Level
(1) 3.5mm mini-stereo jack, video must be present to
pass audio
Stereo analog, video must be present to pass audio
Analog to Digital Conversion
48 kHz Sample Rate, 24-bit
Analog to Digital Reference Level
USB (HID) KEYBOARD & MOUSE
(1) USB Mini A/B Connector (“HOST”); connect a
DXLink Fiber TX to a PC and emulate keyboard
and mouse commands from a DXLink Fiber Receiver
Toggle between DHCP and static IP addressing
Places system in NetLinx Device ID assignment mode
Reset the factory default settings
Restore the factory firmware image
Advanced Configuration Interface
(1) USB Mini-B Connector (“PROGRAM”)
(1) 3.5mm Pluggable Phoenix Terminal Block
Bidirectional RS-232
Standard NetLinx Baudrate 1200-115k
Parity support Odd/Even/None
(1) 3.5mm Mini-Stereo Jack
Port for IR03 Receiver (Optional)
(1) 3.5mm Pluggable Phoenix Terminal Block
Port for IR01 Emitter (Optional)
(1) Green LED indicates whether or not the DXLF-
MFTX-MM-D is powered on
(1) Green LED indicates the presence of video signals
through the module
(1) Green LED indicates the presence of digital audio
signals through the module
(3) Green LEDs, 1 lights to indicate the presence of the
type of analog video through the Multi-Format TX
(composite, Y/c; Y/Pb/Pr or RGB; RGBHV or RGBS)
(1) Red LED lights during the transmission of IR data
Comentarios a estos manuales