AMX MVP-5200i-GW Especificaciones Pagina 131
- Pagina / 196
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Programming
117
MVP-5200i Modero® ViewPoint® Touch Panel with Intercom, 5.2 and 5”
"^" Button Commands (Cont.)
^BNC
Clear current
Take No te
annotations.
Syntax:
"'^BNC-<vt addr range>,<command value>'"
Variable:
variable text address range = 1 - 4000.
command value = (0= clear, 1= clear all).
Example:
SEND_COMMAND Panel,"'^BNC-973,0'"
Clears the annotation of the TakeNote button with variable text 973.
^BNN
Set the TakeNote
network name for
the specified
Addresses.
Syntax:
"'^BNN-<vt addr range>,<network name>'"
Variable:
variable text address range = 1 - 4000.
network name = Use a valid IP Address.
Example:
SEND_COMMAND Panel,"'^BNN-973,192.168.169.99'"
Sets the TakeNote button network name to 192.168.169.99.
^BNT
Set the TakeNote
network port for
the specified
Addresses.
Syntax:
"'^BNT-<vt addr range>,<network port>'"
Variable:
variable text address range = 1 - 4000.
network port = 1 - 65535.
Example:
SEND_COMMAND Panel,"'^BNT-973,5000'"
Sets the TakeNote button network port to 5000.
^BOP
Set the button
opacity.
The button opacity can be specified as a decimal between 0 - 255, where zero (0) is
invisible and 255 is opaque, or as a HEX code, as used in the color commands by
preceding the HEX code with the # sign. In this case, #00 becomes invisible and #FF
becomes opaque. If the opacity is set to zero (0), this does not make the button inactive,
only invisible.
Syntax:
"'^BOP-<vt addr range>,<button states range>,<button opacity>'"
Variable:
variable text address range = 1 - 4000.
button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
1 = Off state and 2 = On state).
button opacity = 0 (invisible) - 255 (opaque).
Example:
SEND_COMMAND Panel,"'^BOP-500.504&510.515,1,200'"
Example 2:
SEND_COMMAND Panel,"'^BOP-500.504&510.515,1,#C8'"
Both examples set the opacity of the buttons with the variable text range of 500-504 and
510-515 to 200.
- MVP-5200i 1
- FCC Information 4
- Statement 4
- Table of Contents 10
- Introduction 15
- MVP-5200i Specifications 16
- Basic Operation 19
- Navigation Wheel 20
- Accessories 23
- Connections and Wiring 24
- Recharging 24
- Cleaning the MVP-TCS-52 24
- Wall Charging Station 25
- Unlocking the Touch Panel 26
- Installing the MVP-WCS-52 27
- MVP- WCS-52 - Rear view 29
- Installation of MVP-WCS-52 30
- Configuring Communication 33
- IR Communication 34
- FIG. 18 Protected Setup page 35
- Site Survey page 37
- Wireless Settings page 39
- Site Survey of available APs 39
- Ethernet Over USB 43
- 7. Click on Next 44
- FIG. 39 USB icon 50
- FIG. 40 G4 Web Control page 50
- 1. Launch your web browser 52
- IP Address of touch panel 53
- Setup Pages 55
- Navigation Buttons 56
- Information Button 57
- Panel Information Page 59
- Time & Date Settings Page 61
- Audio Settings Page 62
- Audio Settings Page (Cont.) 63
- Supported WAV Sample Rates 63
- Power Management Page 64
- Power Management Page (Cont.) 65
- 2. Press the Reboot button 68
- 2. Press the Shutdown button 69
- Security Settings 69
- System Settings Page 71
- Wireless Settings Page 73
- Wireless Security Support 74
- Security Modes 75
- WEP Settings (Cont.) 77
- WPA-PSK Settings 78
- EAP-LEAP 80
- EAP-FAST 82
- EAP-PEAP 83
- EAP-PEAP (Cont.) 84
- EAP-TTLS 85
- Calibrate Page 89
- G4 Web Control Settings Page 90
- G4 Web Control Page (Cont.) 91
- Other Settings 92
- Password Settings Page 93
- SIP Settings Page 95
- Panel Connection Logs Page 97
- Panel Statistics Page 98
- Connection Utility Page 99
- Protected Setup Pages 100
- Upgrading Firmware 101
- Programming 109
- Animated Transitions 110
- Transition Commands 111
- Touch Gesture Recognition 112
- Page Commands 114
- Page Commands (Cont.) 115
- Programming Numbers 119
- Index No. Name Red Green Blue 120
- Font Styles And ID Numbers 121
- "^" Button Commands 123
- Fill Layer = 1 125
- Image Layer = 2 125
- Icon Layer = 3 125
- Text Layer = 4 125
- Border Layer = 5 125
- Miscellaneous MVP Strings 141
- Text Effects 142
- Custom Event Fields 143
- Button Query Commands 143
- Button Query Commands (Cont.) 144
- TPAGEOFF 154
- Input Commands 155
- Embedded codes 156
- Panel Setup Commands 157
- Dynamic Image Commands 158
- ^RAF, ^RMF - Embedded Codes 159
- Escape Sequences 160
- Intercom Commands 161
- Intercom Commands (Cont.) 162
- SIP Commands 163
- SIP Commands (Cont.) 164
- SIP Setup Commands 166
- SIP Setup Commands (Cont.) 167
- Battery Life and Replacement 169
- Upper screw covers 171
- Lower screws 171
- Kickstand 171
- IR emitter panel 171
- Battery Connector 172
- MVP-BP-52 battery placement 172
- Excess battery wiring path 172
- Appendix A: Text Formatting 175
- Input mask character types 176
- Input mask output examples 178
- Special Escape Sequences 178
- Complex Script Support 180
- Terminology 184
- FIG. 87 WPA Overview 185
- FIG. 88 WPA2 Overview 185
- EAP Characteristics 186
- Uploading a Certificate File 189
- Appendix C: Troubleshooting 191
- 3. Reboot the device 193
- Appendix C - Troubleshooting 195
Relacionado con productos y manuales para Monitores de pantalla táctil AMX MVP-5200i-GW
(22 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.057 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales