AMX MAX-HT12T Manual de instrucciones descargar pdf (Pagina 56)

MXD-430 4.3” X Series Wall/Flush Mount Touch Panel

MXD/T-1000, MXD/T-700 and MXD-430 Modero X Series® Touch Panels

3. With a stout, strong point (a push pin or straightened paper-clip, for example), carefully press straight into the

access holes in the center of the molding (FIG. 48) until the snap is disconnected.

Grasp the top of the panel and pull gently outward until the side of the panel is free of the snap. Use your other hand

to stabilize the front of the touch panel.

4. With the edge of the touch panel free, carefully lift down and out to remove the touch panel from the Backbox. Be

careful not to pull on the cables or connectors.

5. To reattach the panel to its Backbox repeat the installation procedure.

Always pull on the frame of the touch panel. NEVER pull on the glass edge.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 62

Sin comentarios

AMX MAX-HT12T Manual de instrucciones Pagina 56