AMX DESIGN XPRESS HOME THEATER V1.3 - ON SITE INSTALLER GUIDE Especificaciones descargar pdf (Pagina 29)

Installation

MXD/T-1000 10.1" Modero® X Series Touch Panels

10. Insert each connector into its corresponding location along the back of the device (FIG. 17). To reach the

RJ45 connector, gently pull it from beneath the electronics cover (FIG. 18). Attach the Ethernet cable and

gently push the connection back under the cover.

11. Test the incoming wiring by attaching the panel connections to their terminal locations and applying

power. Verify that the panel is receiving power and functioning properly to prevent repetition of the

installation.

FIG. 17 Rear of the MXD-1000 (Portrait)

FIG. 18 Rear of the MXD-1000 (detail of the RJ45 connection)

RJ45

Port

USB

Port

Micro-USB

Port

Top

RJ45

cable

clip

RJ45

Cable

Clip

RJ45

Port

Top

Do not disconnect the connectors from the touch panel. The unit must be installed

with the attached connectors before being inserted into the mounting surface.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 45 46

Sin comentarios

AMX DESIGN XPRESS HOME THEATER V1.3 - ON SITE INSTALLER GUIDE Especificaciones Pagina 29