AMX NetWave Server AXR-NWS Manual de instrucciones descargar pdf (Pagina 13)

Installation

AXR-NWS NetWave Server

Installing the Optional NWA-EXT External Extended Range

Antenna

1. Unscrew the extended range antenna (that comes shipped with the AXR-NWS) from the rear

coaxial connector on the NWS unit by twisitng the connector is a counter-clockwise direction.

2. Connect the NWA-EXT antenna to the rear of the NWS by inserting the terminal coaxial

connector and twisting it in a clockwise direction.

Verify that the antenna is not being obstructed by any other device or receiving interference

form anothersource.

FIG. 7 AXR-NWS connection to a Controller

Controller

(rear view)

Mini AXlink connector (3.5 mm)

AXR-NWS

(rear view)

The AXR-NWS does not support devices which previously used the AXR-WAVES

server. AXR-NWS uses a 2.4 GHz digital spread spectrum to avoid common

problems associated with RF control. However, avoid placing the AXR-NWS

components next to microwave ovens, spread-spectrum, consumer microwave video

link transceivers, projectors using Halide/Xenon lamps, or AXR-WAVES Server

(at least 10 ft. away).

Specifications for the Optional NWA-EXT

NWA-EXT

(External Netware Antenna)

• 6 ft coax with various connectors allow maximum flexibility in placement

• 1/2 wave coaxial dipole

• Frequency: 2.4-2.5 GHz

• Polarization: Vertical

• Nominal Impedence: 50 ohms

• VSWR 1.5:1 max at resonance

• RF Power Handling: 50 watts

• Temperature Range: -40ºC to +85ºC

1 2 ... 8 9 10 11 12 13 14 15 16 17 18

Sin comentarios

AMX NetWave Server AXR-NWS Manual de instrucciones Pagina 13