Amx G3 Manual de usuario Pagina 25

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 172
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 24
Color Active-Matrix LCD Touch Panels Installing Touch Panels 17
Four-pin header and DB-9 connector pinouts
Four-
pin
header
Signal Function DB-9 connector (male)
pins
1 PWR +12 VDC power 4 and 7 (strap)
2 TXD Transmit data 3
3 RXD Receive data 2
4 GND Ground 5
Cleaning the Touch Overlay
After installing the Touch Panel, you should clean the touch overlay. To clean the
touch overlay:
1. Disconnect the AXlink and optional video connectors from the CATP.
2. Using a cotton cloth, spray a small amount of cleaning solution consisting of
50% isopropyl alcohol and 50% water onto the cloth.
3. Clean the touch overlay with the damp cloth. Then, wipe the touch overlay
with a dry cloth.
4. Reconnect the AXlink and optional video connectors to the CATP.
Figure 18
Four-pin header and DB-9
connector pinouts
Vista de pagina 24
1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 171 172

Comentarios a estos manuales

Sin comentarios