AMX Advanced Classroom Transmitter TXC-ACT Manual de instrucciones Pagina 48
- Pagina / 141
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Installation and Setup
48
Instruction Manual – DXLink™ Twisted Pair Transmitters/Receiver
4. Ensure the ground wire is positioned so that it does not interfere with any of the connectors.
5. Attach the ground wire to a common earthed ground (see “Attaching a Ground Wire to a Common Earthed Ground”
on the previous page).
6. Continue the DXLink Module installation process (or reapply power to the module).
Attaching Ground Wire to Wallplate TX or Decor Wallplate TX
The Wallplate TX and Decor Wallplate TX each have a designated ground screw on the rear; look for the grounding
symbol. If the DXLink Wallplate does not have a designated screw, use the screw directly above the DXLink (RJ-45)
connector on the rear for grounding.
To attach a ground wire to a DXLink Wallplate or Decor Wallplate TX:
1.
If powered, power down the unit by removing the DXLink cable from the rear.
2. Remove the ground screw and washer for the applicable unit, as indicated in FIG. 24.
3. Secure the ring terminal of the ground wire against the chassis with the ground screw and washer.
FIG. 23 Position ground wire away from connectors
FIG. 24 Wallplate TX and Decor Wallplate TX - Remove ground screw and washer
Correctly positioned ground wires
Designated ground screw
DXLink connector
- Twisted Pair 1
- Transmitters/Receiver 1
- Contents 3
- ESD Warning 6
- Lithium Batteries Notice 9
- Trademark Notices 9
- Copyright Notice 9
- Liability Notice 9
- US FCC Notice 9
- Warnings and Cautions 10
- Applicability Notice 11
- Product Notes 11
- Product Compatibility Tables 12
- Multi-Format TX front view 14
- HDMI TX front view 14
- Multi-Format TX rear view 18
- HDMI TX rear view 19
- Receiver 22
- HDMI RX front view 22
- HDMI RX rear view 23
- Common Features/Functionality 25
- USB Port (Rear) 26
- Shielded Cat6, Cat6A, Cat7* 31
- qualified): 1 per module 32
- Audio Format 33
- Local Audio 35
- Specifications 35
- Installation and Setup 36
- Setup Information 37
- Custom EDID Settings 38
- Example B 40
- Example C 40
- Example D 40
- Example A 40
- Power Budget Calculation 42
- Avoid network loops 43
- #1 Toggle Settings 44
- Installation Options 44
- #2 Toggle Settings 44
- #3 Toggle Settings 45
- V Style mounting hardware 46
- DXLink LEDs 51
- Audio Type Precedence 52
- Control Cables 55
- HDMI RX – Applying Power 58
- IR Receiver cable (FG-IR03) 60
- ID Pushbutton Functions 61
- Network Configuration 64
- TCP/IP Address Configuration 65
- External Master Versions 65
- Factory Default Parameters 67
- Device IDs 68
- Using the ID Pushbutton 68
- Factory Parameters* 70
- Behavior” table below 72
- IRL File Transfers 73
- Transferring IRL Files 75
- Additional Documentation 77
- Additional IRL Information 77
- Overview 78
- Device Numbering and Ports 78
- Aspect Ratio Options 82
- VIDIN_PREF_EDID 85
- IR CHANNELs 88
- IR SEND_COMMANDs 88
- GET MODE 89
- SET MODE (IR command) 90
- USB SEND-COMMANDs (Receiver) 94
- FACTORYAV command 96
- SET TELNET PORT 97
- Troubleshooting 99
- Power Issues 100
- DXLink Connection Issues 101
- Network Setup Issues 102
- Technical Support 102
- DXLink Receiver 103
- Device numbers 103
- Enova DGX 32 103
- DXLink Transmitter 103
- Important Upgrade Information 104
- Firmware Versions 105
- Transferring KIT Files 106
- Telnet Username and Password 108
- Telnet Commands (continued) 110
- Master Connection Modes 116
- Windows Client Programs 117
- Linux Telnet Client 117
- Creating a Virtual Master 120
- Click to open the 120
- Communication Settings 120
- CONNECTION and press Enter 122
- HD-15 Connector Cable Pinout 124
- DVI Connector Pinout 125
- CEA (RGB Color Space): 130
- CVR (RGB Color Space): 131
- CVT (RGB Color Space): 132
- DMR (RGB Color Space): 133
- DMT (RGB Color Space): 133
- Applicability 134
- Remove jackscrew and washer 135
- Appendix H – EDID Programming 136
- DXLink Connection to PC 137
- EDID Programmer View 138
- Read Error Message 139
- AMX EDID Library 139
- 11/19/14 141
Relacionado con productos y manuales para Receptor AMX Advanced Classroom Transmitter TXC-ACT
Receptor AMX UDM-RX02 Especificaciones
(126 paginas)
(126 paginas)
Receptor AMX MX8 Manual de usuario
(37 paginas)
(37 paginas)
Receptor AMX UDM-0102 Manual de usuario
(3 paginas)
(3 paginas)
Receptor AMX UDM-0102 Manual de usuario
(2 paginas)
(2 paginas)
Receptor AMX MX8 Manual de instrucciones
(22 paginas)
(22 paginas)
Receptor AMX DXLink HDMI Manual de usuario
(6 paginas)
(6 paginas)
Receptor AMX MX16 Manual de usuario
(2 paginas)
(2 paginas)
Receptor AMX MX8 Manual de usuario
(2 paginas)
(2 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.065 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales