AMX NXR-ZRP Información técnica descargar pdf (Pagina 12)

Overview

NXR-ZGW/-ZRP

Mesh Network Arrangements

The following installations depend upon the criteria for the network. A home installation would perhaps

only need one NXR-ZGW or PAN ID where a commercial installation might require a NXR-ZGW and

several NXR-ZRPs.

Single PAN ID installations

After you have installed the NXR-ZGW, you should consider the arrangement of devices. The following

is an example where there is only one NXR-ZGW in the installation and thus only one PAN ID with

which to contend.

Multiple PAN ID installations

A more commercial application of the NXR-ZGW is having multiple gateways and specific devices

operating in close proximity of each other. End devices and repeaters of different networks can operate

side-by-side without interference if they have different PAN ID numbers. See Setting up a

Network section on page 23 for setting the PAN ID and adding device EUI Addresses.

When adding a ZigBee network to a NetLinx master, an Ethernet switch or hub must

be added to the master for proper function of the ZigBee network.

FIG. 3 Single PAN ID Network

CAT5 Ethernet

connection

NXR-ZGW

(Coordinator)

1 hop

NetLinx Master

Mio R-4

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 41 42

Sin comentarios

AMX NXR-ZRP Información técnica Pagina 12