
Chapter 2 Installation and Configuration
NI 3100/3110 User Manual 2-6 ni.com
Upgrading RAM
The NI 3100/3110 memory is not field upgradeable. Contact your
NI representative for upgrade options.
Installing an Internal PCI or PCI Express Peripheral
Module
The NI 3100/3110 can accept a PCI Express or PCI half-length expansion
card. (Go to
ni.com/info and enter exfnrw for a list of approved PCI
and PCI Express cards for use with the NI 3100/3110.) The riser plugs into
the I/O board. The kit includes two risers supplied in the kit, one for PCI
and one for PCI Express.
To install an expansion card, you need the following items:
❑ NI 3100/3110 industrial controller
❑ 2.5 mm hex key
❑ #1 Phillips screwdriver
❑ 5 mm flat blade screwdriver
Follow these steps to install a PCI Express or PCI expansion card:
1. Shut down and remove power from the NI 3100/3110.
2. Turn the NI 3100/3110 upside down (with the heatsink facing
downward).
Comentarios a estos manuales