AMX CSG-580 Especificaciones descargar pdf (Pagina 171)

Programming

157

MVP-9000i 9" Modero® ViewPoint® Touch Panel with Intercom

Intercom Commands (Cont.)

^ICM-TALK

^ICM-LISTEN

Intercom modify

command.

Intercom modify command. For backwards compatibility both versions are supported.

In this release, however, the TALK and LISTEN sub commands are ignored. The

microphone and/or speaker are activated based on the initial mode value of the intercom

start command and the audio data packet flow is started upon receipt of this command by

the panel.

Syntax:

SEND_COMMAND <DEV>,"'^ICM-TALK'"

Variables:

None.

Example:

SEND_COMMAND TP1,"'^ICM-TALK'"

^ICM-MICLEVEL

Intercom modify

command.

Used to set the microphone level during an intercom call.

Syntax:

SEND_COMMAND <DEV>, "^ICM-MICLEVEL"

Variables:

Valid levels are from 0 to 100.

Example:

SEND_COMMAND TP1, "^ICM-MICLEVEL,40"

^ICM-MUTEMIC

Intercom modify

command.

Set the state of the microphone on a panel to muted (1) or unmuted (0). At the start of

each call the microphone starts out unmuted.

Syntax:

SEND_COMMAND <DEV>, "^ICM-MUTEMIC"

Variables:

None.

Example:

SEND_COMMAND TP1, "^ICM-MUTEMIC,1"

^ICM-

SPEAKERLEVEL

Intercom modify

command.

Used to set the speaker level during an intercom call.

Syntax:

SEND_COMMAND <DEV>, "^ICM-SPEAKERLEVEL,55"

Variables:

Valid levels are from 0 to 100.

Example:

SEND_COMMAND TP1, "^ICM-SPEAKERLEVEL,55"

1 2 ... 166 167 168 169 170 171 172 173 174 175 176 ... 201 202

Comentarios a estos manuales

Sin comentarios

AMX CSG-580 Especificaciones Pagina 171

Comentarios a estos manuales

Relacionado con productos y manuales para Redes AMX CSG-580