AMX Mouse Guía de usuario descargar pdf (Pagina 22)

16 AMX Series Installer/User Guide

Network Port

User Ports

Server Ports

Network Port

User Ports

Server Ports

Terminal Port

To make a LAN connection:

Using a UTP cable, connect the Network port on the back of the AMX

to your LAN.

NOTE: Both AMWorks and the AMX must be on the same subnet in class A, B or C to

function properly.

Connecting devices to the AMX

Once the AMX switch is installed, you can begin attaching servers or serial

devices to it. All are connected to the AMX through the use of AMIQ modules.

For information on connecting other Avocent KVM switches to the AMX, see

Installing a Tiered AMX System later in this chapter.

Figure 2.6: AMX5000 Rear Panel

Figure 2.7: AMX5010 Rear Panel

To connect servers to the AMX system:

1. Locate an AMIQ module appropriate to the server you wish to attach.

2. Plug the AMIQ connectors into the appropriate ports on the back of the

selected server.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 71 72

Sin comentarios

AMX Mouse Guía de usuario Pagina 22