AMX Mouse Guía de usuario descargar pdf (Pagina 9)

The ROM can quickly and simply be fitted using only a screwdriver, but when handling

the ROM care must be taken to isolate it from sources of static electricity (e.g: synthetic

clothing, carpets etc.). Take care to touch some earthed surface before removing the ROM

from its protective anti-static foam, and always handle the chip by holding the ENDS, refrain

from touching the pins unnecessarily: The fitting procedure is quite straightforward, but if you

are not confident about fitting the ROM then consult your dealer.

Figure 1: Location of the paged ROM sockets

1. Unplug the computer from the mains:

2. Remove the four screws on the BBC Microcomputer marked "FlX"- two are on

the back panel and two on the underside.

3. Lift off the lid and remove the bolts holding the keyboard in place:

4. With the computer orientated as for use, ease the keyboard forward to reveal

the Five large ROM sockets as indicated in Fig: 1:

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 35 36

Sin comentarios

AMX Mouse Guía de usuario Pagina 9