Amx SIP Communications Gateway CSG-500 Manual de usuario descargar pdf (Pagina 81)

Device Configuration

CSG SIP Communications Gateway Operation/Reference Guide

Configuration Page - SIP Settings Tab

The options on the SIP Settings tab of the Configuration page are used to set the proxy server address

and port and the username and password to log into the server. These settings enable VoIP and enable

you to give your Metreau Entry Communicator phone capabilities to contact other units, such as

intercom-enabled touch panels and IP phones.

FIG. 68 Configuration page - SIP Settings tab

Configuration Page - SIP Settings Tab

Username This option enables you to enter the user name used for authentication to the proxy

server. Normally, the user name is the same as the extension you are using.

Password This option enables you to enter the password for the user at the proxy server.

Server Address This option enables you to enter the IP address or DNS name of the proxy server that

you want to use to register. The IP address depends on whether you connect the entry

communicator to one of the IP Phone ports or through the LAN with the CSG.

Server Port The option displays UDP the port you use to connect to the proxy server. The standard

SIP port is 5060, but some providers use different ports.

STUN Address This option enables you to enter the IP address or DNS name of the Simple Traversal of

UDP through NATs (STUN) server. This field is optional.

Local Domain This is the realm used for authentication. This field is optional.

Enable Phone This option enables the SIP Stack on startup. If you disable this option, the Metreau

Entry Communicator will not attempt to read the rest of the configuration and will not

existing intercom functionality

Connection Displays whether your connection to the proxy server is registered. This field is

view-only.

1 2 ... 76 77 78 79 80 81 82 83 84

Sin comentarios

Amx SIP Communications Gateway CSG-500 Manual de usuario Pagina 81