Amx Sensors and Receivers IR Manual de usuario Pagina 19

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 22
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 18
Wiring and Installation
15
I
R Sensors and Receivers
Installation method B
Use when installing a swivel-mount unit using the provided mounting bracket.
!
On drywall, install using the included wall anchors. Use a 3/16-inch drill bit.
!
On wood, install using the included #6 mounting screws.
1. If you are installing the IRX-SM+, remove the housing and wire the unit to the AMX IR
receiver as shown in Wiring.
2. If you are installing the AXR-IRSM+, remove the housing and locate the AXlink connector.
FIG. 20 Installation Method A
Two #6 nylon screw anchors and two #6 x 1-inch long screws are provided with each
unit.
FIG. 21 Installation method B
Vista de pagina 18
1 2 ... 14 15 16 17 18 19 20 21 22

Comentarios a estos manuales

Sin comentarios