Amx NetLinx Integrated Controllers NI-700/900 Manual de usuario descargar pdf (Pagina 26)

Connections and Wiring

NI-700 & NI-900 Hardware Reference Guide

FIG. 9 diagrams the RJ-45 pinouts and signals for the Ethernet RJ-45 connector and cable.

Ethernet LEDs

The NI-700 and NI-900 only allow you to set the Ethernet mode to AUTO negotiate the Ethernet

connection speed. Using any of the other connection modes (10 Half/Full or 100 Half/Full) results in an

error message.

FIG. 9 RJ-45 wiring diagram

FIG. 10 Ethernet LEDs

SPD - Speed LED

connection speed is 100 Mbps

and turns Off when speed is

lights (yellow) when the

L/A - Link/Activity LED

lights (green) when the

Ethernet cables are

connected and terminated

10 Mbps.

correctly.

On NetLinx Masters (such as those aboard the NI-700), from within the Telnet or

Terminal applications; you can send the SET ETHERNET MODE command to assign

the speed of your Ethernet connection.

Sample command: SET ETHERNET MODE AUTO

1 2 ... 21 22 23 24 25 26 27 28 29 30

Sin comentarios

Amx NetLinx Integrated Controllers NI-700/900 Manual de usuario Pagina 26