Amx TPI-PRO-2 Manual de usuario descargar pdf (Pagina 95)

Programming

TPI-PRO Total Presentation Interface - Pro Edition

"^" Button Commands (Cont.)

^BDO

Set the button

draw order.

Determines what order each layer of the button is drawn.

Syntax:

"'^BDO-<vt addr range>,<button states range>,<1-5><1-5><1-5><1-

5><1-5>'"

Variable:

variable text address range = 1 - 4000.

button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons

1 = Off state and 2 = On state).

layer assignments = 1 - Fill Layer

2 - Image Layer

3 - Icon Layer

4 - Text Layer

5 - Border Layer

Note: The layer assignments are from bottom to top. The default draw order is

12345.

Example:

SEND_COMMAND Panel,"'^BDO-530,1&2,51432'"

Sets the button’s variable text 530 ON/OFF state draw order (from bottom to top) to

Border, Fill, Text, Icon, and Image.

Example 2:

SEND_COMMAND Panel,"'^BDO-1,0,12345'"

Sets all states of a button back to its default drawing order.

^BFB

Set the feedback

type of the button.

This command only works on General-type buttons.

Syntax:

"'^BFB-<vt addr range>,<feedback type>'"

Variable:

variable text address range = 1 - 4000.

feedback type = (None, Channel, Invert, On (Always on), Momentary, and Blink).

Example:

SEND_COMMAND Panel,"'^BFB-500,Momentary'"

Sets the Feedback type of the button to 'Momentary'.

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 147 148

Sin comentarios

Amx TPI-PRO-2 Manual de usuario Pagina 95