AMX NXB-CCG-K Especificaciones descargar pdf (Pagina 6)

NXB-CCG-K NetLinx ClearConnect Gateway

NXB-CCG-K NetLinx® Clear Connect™ Gateway

Product Specifications

NXB-CCG-K (FG2606-868) Specifications

Power Requirements: • Power Consumption: 600mA @ 5VDC, DC adapter optional (5V DC,

3A).

• Surge Protection: To withstand surge voltages without damage or loss

of operation, in accordance with IEEE C62.41-1991 Recommended

Practice on Surge Voltages in Low-Voltage AC Power Circuits.

• Power Failure Memory: If power is interrupted, the NXB-CCG-K will

return to its previous state when power is restored.

Front Panel Components:

Power/Status LED: Displays power status and other system status indicators.

RF LED: Displays the Tx / Rx activity on the RF link.

Ethernet LED: Displays the connection status and Tx / Rx activity on the Ethernet link.

Rear Panel Components:

CAT5 Cable Port: Maximum cable length: 328 ft (100 m).

USB Cable Port: Manufacturer use only.

Reset Button: Press and hold for 30 seconds to restore the system to the Factory Default

settings.

Power Jack (to DC adapter) (IEC PELV / NECR Class 2). This product should be connected to a safety

isolating supply conforming with EN61558.

Operating Environment: • 32 °F to 104 °F (0 °C to 40 °C), 0% to 90% humidity, non-condensing.

• Indoor use only.

ESD Protection: ESD protection to withstand electrostatic discharge without damage or

memory loss, in accordance with IEC 61000-4-2.

Communications: • The NXB-CCG-K communicates to other Clear Connect devices through

RF.

• All devices (except wired accessory dimmers/switches) must be located

within 30 feet (9 m) of the NXB-CCG-K.

Auto Discovery: Supports the ZeroConf auto discovery protocol.

Dimensions (HWD):

• Without antenna: 1 1/8” x 2 5/8” x 4 7/16” (2.86 cm x 6.60 cm x 11.23 cm)

• With antenna: 6 1/2” x 2 5/8” x 4 7/16” (17.15 cm x 6.60 mm x 112.27

mm)

Weight:

0.3 lbs (136.08 g)

Certifications: • CE

Included Accessories: • NXB-CCG-K Installation Guide (93-2606-68)

Other AMX Equipment: • CCD3-OCRB-P-WH, 868 MHz Ceiling Mount Occupancy/Vacancy

Sensor (FG2606-44-WH)

• PS-CCG 5 VDC, 3A Power Supply With 2.1mm Barrel Connector

(FG423-61)

Proper orientation of the antenna helps ensure maximum range and the best

performance. The NXB-CCG-K should be positioned centrally to the devices being

controlled, and as high and clear of obstructions as possible. The NXB-CCG-K

utilizes an omni-directional antenna, which produces a circular pattern perpendicular

to the antenna. For best performance, the antenna should be positioned vertically (tip

up or down, not sideways). Try to keep the antenna at least 2 feet from metallic

objects.

1 2 3 4 5 6 7 8 9 10 11 ... 31 32

Comentarios a estos manuales

Sin comentarios

AMX NXB-CCG-K Especificaciones Pagina 6

Comentarios a estos manuales

Relacionado con productos y manuales para Gateways / Controladores AMX NXB-CCG-K